:: ELPORT IMPORT LTD ::

|

|

|

Add to Favorites

The pad printing

A Mirtal - pad printing

Screens
Magnetic and non-magnetic plates

Screens

Suitable to obtain controlled depth on photopolymer plate and for screened depth on steel plate.

SCREEN TYPE AND STANDARD SIZES

Type	Sizes
Screen 54 lines - 90%	200x600 mm
Screen 80 lines - 90%	150x300 mm
Screen 80 lines - 90%	200x600 mm
Screen 80 lines - 90%	250x600 mm
Screen 80 lines - 80%	200x600 mm
Screen 80 lines - 70%	200x600 mm
Screen 120 lines - 90%	150x300 mm
Screen 120 lines - 90%	200x600 mm
Screen 120 lines - 90%	250x600 mm
Screen 150 lines - 90%	200x600 mm

NOTE: Elport-Import can supply screens of variable percentage and definitions together with non-standard sizes for special use.

Magnetic and non-magnetic plates

Magnetic plates are used to hold thin steel or photopolymer plates on machines fitted with open ink tray system.

The non-magnetic plates allow positioning of thin steel and photopolymer plates on machines using the hermetic (closed ink) system.

MAGNETIC PLATE STANDARD SIZES

Sizes
70x60x10 mm	Reference pins at 2"
70x140x10 mm	Reference pins at 5"
70x150x10 mm	Reference pins at 5"
150x150x10 mm	Reference pins at 5"
100x70x10 mm
100x100x10 mm
100x150x10 mm
100x200x10 mm
100x250x10 mm
125x90x10 mm
125x100x10 mm
125x150x10 mm
125x200x10 mm
125x250x10 mm
125x300x10 mm
125x350x10 mm
150x90x10 mm
150x150x10 mm
150x200x10 mm
150x250x10 mm
150x350x10 mm
150x500x10 mm
180x250x10 mm
180x400x10 mm
200x90x10 mm
200x135x10 mm
200x200x10 mm
200x250x10 mm
200x300x10 mm
200x400x10 mm
200x450x10 mm
200x620x10 mm
250x250x10 mm
250x270x10 mm
250x400x10 mm
250x450x10 mm
250x500x10 mm
250x750x10 mm

NOTE:	For special sizes, please ask for detailed quotation.
	On all magnetic plates, where not supplied as standard, it is possible to insert 2 reference pins, choosing the side and the pitch from 2"/2,5"/5"/6,5".

NON-MAGNETIC PLATE STANDARD SIZES

Size
150x70x10 mm	Reference pins at 5"
150x150x10 mm	Reference pins at 5"
200x100x10 mm	Reference pins at 2,5"
250x70x10 mm	Reference pins at 2"
250x100x10 mm	Reference pins at 2,5"
250x125x10 mm	Reference pins at 2,5"
220x350x10 mm	For Logica 125 4 col.
300x140x10 mm	Reference pins at 5"
350x100x10 mm	Reference pins at 2,5"
350x140x10 mm	Reference pins at 5"
400x100x10 mm	Reference pins at 2,5"
400x140x10 mm	Reference pins at 5"
400x180x10 mm	Reference pins at 5"
400x200x10 mm	Reference pins at 6,5"
420x210x10 mm	Reference pins at 6,5"
620x200x10 mm	Reference pins at 6,5"

NOTE:	On one side of the plate there are two reference pins. Their interaxe is indicated in the right column of the table.
	For special sizes, please ask for detailed quotation.

© Copyrights Elport-Import 2009